您好,欢迎来到山东三盛建筑机械有限公司官方网站! 加入收藏 | 联系我们 |

contact
行业新闻当前位置:首页-新闻资讯 > 行业新闻 >

塔机配件的基本维护常识:
Basic maintenance knowledge of tower crane accessories:
1、装、拆卸和调整回转机构时,要注意保证回转机构减速器的中心线与齿轮中心线平行,其啮合面不小于70%,啮合间隙要适合。
1, installation, disassembly and adjustment of slewing mechanism, it is necessary to pay attention to ensure that the center of the rotary gear reducer and gear center line parallel, the meshing surface is not less than 70%, meshing clearance to fit.
2、常检查各机构运转是否正常,有无噪音,如发现故障,必须及时排除。
2, often check the operation of the institutions are normal, there is no noise, such as fault detection, must be promptly ruled out.

20160709040839858.jpg

3、机构的制动器应经常进行检查和调整制动瓦和制动轮的间隙,保证灵活可靠。在摩擦面上,不应有污物存在,遇有污物必须用汽油或稀料洗掉。
3, the brake should be regularly check and adjust the brake shoe and brake wheel clearance, to ensure flexible and reliable. In the friction surface, there should not be any dirt, dirt must use gasoline or thinner wash.
4、速箱、变速箱、外啮合齿轮等各部分的润滑以及液压油均按润滑表中的要求进行
4, gearbox, gearbox, gear and other parts of the external lubrication and hydraulic oil are in accordance with the requirements of the lubrication table
5、常检查华夏塔机配件各部的连接情况,如有松动应予拧紧。塔身连接螺栓应在塔身受压时检查松紧度,所有连接稍轴都必须有开口销,并需张开充分。
5, check the connection condition of each part of the Chinese tower crane accessories, such as loose should be tightened. The tower bolts should be in compression tower when check the tightness of a little shaft all connections must have openings, and need to fully open.
我们会用优良的、贴切的服务,让顾客感受到亲情般的温暖,始终视顾客的安全如己如亲。我们会用自然优势打造产品的独特之处,从而给消费者带来享用产品时独特的心境。
We will use good, appropriate service, so that customers feel the warmth of the family, always depending on the customer's safety, such as their own pro. We will use the natural advantage to create a unique product, so as to bring consumers enjoy the unique mood of the product.

上一篇:塔机配件地脚螺栓的安装规划

下一篇:常用的加固方法有几种

二维码