您好,欢迎来到山东三盛建筑机械有限公司官方网站! 加入收藏 | 联系我们 |

contact
公司新闻当前位置:首页-新闻资讯 > 公司新闻 >

  标准件正确的操作方法:

  Standard parts correct operation method:

  (1)螺帽必需垂直于螺丝的轴线进行旋合,切勿歪斜;

  (1) the nut must be perpendicular to the axis of the screws are screwed, not skew;

  (2)在旋紧进程中,施力必需平均,使劲不可跨越平安扭力值(附平安扭力矩表);

  (2) in the tightening process, the force required on average, not hard across safely torque (with safe torque table);

  (3)尽量选用扭力扳手或套筒扳手,防止使用勾当扳手或电动扳手;

  (3) try to use torque wrench or socket wrench to prevent the use of movable wrench or electric wrench;

  (4)在低温状况下使历时必需冷却,且使历时不要疾速扭转,以避免温度连忙回升致使锁死(如电动扳手等)。

  (4) under the low temperature condition, the duration must be cooled, and the duration should not be rapidly reversed, so as to avoid the temperature rising quickly leading to the lock (such as electric wrench, etc.).

  我们的标准件质量好,价格实惠,服务周到 ,在业内一直深受新老客户的好评与青睐,而且我们坚信在以后的经营中我们本着诚信第一的原则会越做越好!

  The quality of our standard is good, affordable, and thoughtful service, in the industry has been highly praised and favored by the old and new customers, and we believe that in the future business in our first principle of good faith will be better!


上一篇:塔机配件力矩限位器的故障诊断与排除方法

下一篇:购买标准件的注意事项

二维码